Configurable Automotive Press-in Snap Rivet
Makerworld ยท Murata
DescriptionThis configurable parametric model lets you print almost any automotive press-in snap rivet that you need. Just hit the green Customize button and input your dimensions. Everything prints in the strongest orientation so the head won't just pop off like most other 3D printed fastener designs.Head Diameter recommendation is 2 to 3 times the shaft diameter. And anything less than 2X the shaft diameter will get bumped up automatically.Shaft Diameter recommendation is 0.2 mm smaller than the hole it will go into.Grip Length recommendation is 0.2 to 0.5 mm greater than the total panel stackup.InstallationInsert the V-shaped insert into the O-shaped washer.Install them into the panel hole.Push the T-shaped insert in to lock everything in place with a click. MeasurementIf you need a tool to measure hole diameter or depth, there is a simple printable hole gauge available in the print profiles. It consists of a conical set of plugs up to 12 mm diameter and short hook rule for getting the distance to the backside of a hole.
MaterialASA
Color#161616
Estimated Print Time4h 52m
Estimated Weight26.00 g
Build VolumeNot available yet
Nozzle0.40 mm
Plates5
Remote Print ProjectAvailable
ADD TO CART
26.77 EURREQUEST PRINT
This product can also be submitted as a print request if you need a manual review before ordering.
WhatsApp: +40 799 180 360
STR. PRINCIPALA 1, Bacau, Romania
General: info@h4r.biz